Volta Pulse X

1. P01MidframeAluminium midframe with printed screw map.
2. P02Logic boardMainboard with chipset, RAM and storage pre-soldered.
3. P03BatteryLi-ion cell with keyed connector and pull-tab adhesive. Buy spare
4. P04Display assemblyPanel, digitiser and front glass as one unit. Buy spare
5. P05Main camera moduleRear camera with ribbon connector.
6. P06Front camera moduleSelfie camera, press-fit into the frame.
7. P07Charge port boardUSB-C sub-board with mic. Buy spare
8. P08Main flex cableLinks the charge port board to the logic board.
9. P09LoudspeakerBottom speaker enclosure.
10. P10Button flexPower and volume flex with brackets.
11. P11SIM trayColour-matched SIM tray and ejector pin.
12. P12Back coverColour-matched back cover. Buy spare
13. P13Screw setEvery screw, sorted by step.
14. P14Ultra-wide camera moduleSecondary rear camera.
15. P15Back glass adhesiveDie-cut gasket for the back glass.

Pulse X builds like a retail phone. The back glass is adhesive-sealed and the logic board is a two-layer stack. The guide walks you through every flex cable. Take your time with the display connector.